DMX 512
The unit operates using a digital DMX 512 (1990) signal. Connection between the controller and
the projector must be carried out using appropriate cables with low capacitance and 120 Ω as
impedance.
Pin 1 connected to the ground, Pin 2 connected to the DATA-, Pin 3 connected to the DATA+.
Do not connect the cable ground to the plug chassis. The plug housing must be isolated.
Connect the controller signal to the DMX IN projector plug and connect it to the next projector by
connecting the DMX OUT plug on first projector to the DMX IN plug of second one.
By this way, all projectors are cascade connect.
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, it is recommended to use a DMX terminator. This helps in preventing corruption of
the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a
120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket
of the last fixture in the chain.
Please see illustrations below.
4
5
OPERATION INSTRUCTIONS
1) AUTO RUN
2) SOUND
3) SLAVE
4) DMX MODE
Auto Run mode
Press MODE button to show:
AUTO RUN “FUNCTION”
FQN:01-99
FQN01-99 to adjust the Frequency
Summary of Contents for PIXEL MINI BAR 12
Page 1: ......
