CLEANING AND MAINTENANCE
ATTENTION:
REMOVE MAINS POWER PRIOR TO ACCESSING THE INTERNAL OF THE PROJECTOR.
The dust can reduce the luminous output substantially.
Regularly clean the front lenses glass using a soft cotton cloth, damped with a specialist glasses
cleaning solution.
Periodically check all mechanical parts and the gasket, replacing them if necessary.
All screws for installing the devices or parts of the device have to be tightly connected and in
perfect condition.
There must not be any deformations on the housing, lenses, fixations and installation spots (ceiling,
suspension, trussing).
Check all earth connection, main cables and electrical components. Refastening if necessary.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
In order to make the projector in good condition and extend the life time, we suggest a regular
inspection.
Should you need any spare parts, please order genuine parts referring to an authorized center.
The information contained in this publication has been carefully prepared and checked.
However, no responsibility will be taken for any errors.
All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without
prior written consent from Red Lighting.
Red Lighting reserves the right to make any modifications to any of its products without prior notice.
Red Lighting assumes no responsibility for the use or application of the products or circuits described here in.
R&D LIGHTING S.r.l.
Viale dei Mille 60, 50131 Firenze, Italy
Capitale Sociale
€
100.000 i/v - Codice Fiscale / Part. IVA 06209690483
www.red-lighting.com
Summary of Contents for PIXEL MINI BAR 12
Page 1: ......
