P
T
T
S
R
Q
f
S
T
T
27
4 - TROLLEY KIT ASSEMBLY
GB
Technical Assistance - All rights reserved - Reproduction prohibited
Take the chain “S” and insert it on the two pinions “T” of the auger, then on the gear motor pinion. At this point, the gear motor “P” can
be secured to the boiler.
Secure it with the two washers “R” and two screws
“Q”, adjusting the position so that the chain has
the right tension, then secure it (To make it easier
to secure the gear motor “P” to the structure, it is
possible to remove the expansion vessel lock and
move it).
Attention!! For proper chain
tensioning, its inclined side must
not be taut, but slightly loose.
Attention! Adjust the “P” gear motor
position so that value “f” is within 10 mm
and 15 mm
