P
22
20-CLEANING
For the brazier to be cleaned properly, fully remove it from its housing and thoroughly clean all the holes and the grate on the bottom. If
high quality pellets are used, you will normally only need to use a brush to restore the optimal operating conditions of the component.
Cleaning the ash collection compartment
To clean the ash collection compartment, extract the ash pan “
P
”. Remove any residual ash before reinserting the pan. Your experience and
the quality of the pellets used will determine how often the ash pan must be cleaned.
However, it is recommended not to exceed 2 or 3 days.
Attention! Once cleaning is completed, remember to place back the ash pan “P”, insert the brazier “b” and close the firebox
door.
