16
Chapter 2:Red Hat Network Registration Client
If you require a proxy username and password, change the values of numbers 0, 4, and 6. Set
en-
ableProxyAuth
to
Yes
to enable username/password authentication for the proxy. Set
prox-
yUser
and
proxyPassword
to the appropriate username and password for the proxy.
2.2 Starting the Red Hat Network Registration Client
You must be root to register a system with RHN. If you start the
Red Hat Network Registration
Client
as a standard user, you will be prompted to enter the root password before proceeding. To start
the
Red Hat Network Registration Client
in Red Hat Linux 6.2 or higher, use one of the following
methods:
1. On the GNOME desktop, go to the
Main Menu Button
(on the Panel) =>
Programs
=>
System
=>
Red Hat Network
2. On the KDE desktop, go to the
Main Menu Button
(on the Panel) =>
Red Hat
=>
System
=>
Red
Hat Network
3.
Type the command
rhn_register
at a shell prompt (for example an xterm or gnome-terminal)
4. If you are not running the X Window System, type the command
rhn_register
at a virtual
console or remote terminal. Please refer to Section 2.7, Text Mode RHN Registration Client for
further details.
CAUTION
You must use
Python 1.5.2-24
or later with Secure Sockets Layer (SSL)
support. If not, the information you transfer will not be encrypted. If you
have an earlier version of Python, you will see the message shown in Fig-
ure 2–1, Use Python 1.5.2-24 or later. To determine the version of Python
on your system, use the command
rpm -q python
. It is strongly recom-
mended you use
Python 1.5.2-24
or later.
Summary of Contents for JBoss Developer Studio 3.0
