Red Hat GFS 6.0 - Administrator'S Manual Download Page 133

Page: 133 / 192

Chapter 10. Using the Fencing System

119

Upon seeing this message (by monitoring

/var/log/messages

or equivalent), an administrator

must manually reset the node specified in the message. After the node is reset, the administrator

must run the command

fence_ack_manual

to indicate to the system that the failed node has been

reset. Recovery of the reset node will then proceed. Refer to Section 6.6

Creating the

fence.ccs

File

and Section 6.7

Creating the

nodes.ccs

File

for information on how to configure with this type of

fencing.

10.2.7.1. Usage

fence_ack_manual -s

IPAddress

The IP address of the node that was manually reset.

Summary of Contents for GFS 6.0 -

































































































































































































Search results

Summary of Contents for GFS 6.0 -

Reviews:

Related manuals for GFS 6.0 -

Brands by name

Popular brands

Red Hat GFS 6.0 -, Administrator'S Manual

Search results

Summary of Contents for GFS 6.0 -

Reviews:

Related manuals for GFS 6.0 -

Brands by name

Popular brands