Red Hat GFS 6.0 -, Administrator'S Manual

Page: 13 / 192

Introduction v
4.2. Provide Your Subscription Number
Your subscription number is located in the package that came with your order. If your package did not
include a subscription number, your subscription was activated for you and you can skip this step.
You can provide your subscription number when prompted during the
Setup Agent or by visiting
http://www.redhat.com/register/.
4.3. Connect Your System
The Red Hat Network Registration Client helps you connect your system so that you can begin to get
updates and perform systems management. There are three ways to connect:
1. During the Setup Agent — Check the Send hardware information and Send system package
list options when prompted.
2. After the Setup Agent has been completed — From the Main Menu , go to System Tools , then
select Red Hat Network .
3. After the Setup Agent has been completed — Enter the following command from the command
line as the root user:
• /usr/bin/up2date --register
5. Recommended References
For additional references about related topics, refer to the following table:
Topic Reference Comment
Shared Data Clustering and
File Systems
Shared Data Clusters by Dilip
M. Ranade. Wiley, 2002.
Provides detailed technical
information on cluster file
system and cluster
volume-manager design.
Storage Area Networks (SANs) Designing Storage Area
Networks: A Practical
Reference for Implementing
Fibre Channel and IP SANs,
Second Edition by Tom Clark.
Addison-Wesley, 2003.
Provides a concise summary of
Fibre Channel and IP SAN
Technology.
Building SANs with Brocade
Fabric Switches by C.
Beauchamp, J. Judd, and B.
Keo. Syngress, 2001.
Best practices for building
Fibre Channel SANs based on
the Brocade family of switches,
including core-edge topology
for large SAN fabrics.
Building Storage Networks,
Second Edition by Marc Farley.
Osborne/McGraw-Hill, 2001.
Provides a comprehensive
overview reference on storage
networking technologies.