Red Hat CLUSTER SUITE - FOR RHEL 4 Overview Download

Page: 54 / 74

Chapter 1. Red Hat Cluster Suite Overview

Redundant server private IP

The backup router’s private real IP address.

The rest of the panel is for configuring the heartbeat channel, which is used by the backup

node to monitor the primary node for failure.

Heartbeat Interval (seconds)

Sets the number of seconds between heartbeats — the interval that the backup node

will check the functional status of the primary LVS node.

Assume dead after (seconds)

If the primary LVS node does not respond after this number of seconds, then the

backup LVS router node will initiate failover.

Heartbeat runs on port

Sets the port at which the heartbeat communicates with the primary LVS node. The

default is set to 539 if this field is left blank.

1.10.4. VIRTUAL SERVERS

The

VIRTUAL SERVERS

panel displays information for each currently defined virtual

server. Each table entry shows the status of the virtual server, the server name, the virtual

IP assigned to the server, the netmask of the virtual IP, the port number to which the service

communicates, the protocol used, and the virtual device interface.

Summary of Contents for CLUSTER SUITE - FOR RHEL 4











































































Search results

Summary of Contents for CLUSTER SUITE - FOR RHEL 4

Reviews:

Related manuals for CLUSTER SUITE - FOR RHEL 4

Brands by name

Popular brands

Red Hat CLUSTER SUITE - FOR RHEL 4, Overview

Search results

Summary of Contents for CLUSTER SUITE - FOR RHEL 4

Reviews:

Related manuals for CLUSTER SUITE - FOR RHEL 4

Brands by name

Popular brands