Red Hat CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS Manual Download Page 38 | Manualshive

Page: 38 / 108

background image

Chapter 4. LVM Administration with CLI Commands

26

6. Mount the file system to make it available for use.

4.3.14. Recreating a Volume Group Directory

To recreate a volume group directory and logical volume special files, use the

vgmknodes

command.

This command checks the LVM2 special files in the

/dev

directory that are needed for active logical

volumes. It creates any special files that are missing removes unused ones.

You can incorporate the

vgmknodes

command into the

vgscan

command by specifying the

--

mknodes

argument to the command.

4.4. Logical Volume Administration

This section describes the commands that perform the various aspects of logical volume
administration.

4.4.1. Creating Logical Volumes

To create a logical volume, use the

lvcreate

command. You can create linear volumes, striped

volumes, and mirrored volumes, as described in the following subsections.

If you do not specify a name for the logical volume, the default name

lvol

#

is used where

#

is the

internal number of the logical volume.

The following sections provide examples of logical volume creation for the three types of logical
volumes you can create with LVM.

4.4.1.1. Creating Linear Volumes

When you create a logical volume, the logical volume is carved from a volume group using the free
extents on the physical volumes that make up the volume group. Normally logical volumes use up any
space available on the underlying physical volumes on a next-free basis. Modifying the logical volume
frees and reallocates space in the physical volumes.

The following command creates a logical volume 10 gigabytes in size in the volume group

vg1

.

lvcreate -L 10G vg1

The following command creates a 1500 megabyte linear logical volume named

testlv

in the volume

group

testvg

, creating the block device

/dev/testvg/testlv

.

lvcreate -L1500 -ntestlv testvg

The following command creates a 50 gigabyte logical volume named

gfslv

from the free extents in

volume group

vg0

.

lvcreate -L 50G -n gfslv vg0

«
...
36
37
38
39
40
...
»

Summary of Contents for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS













































































































Reviews:

No comments

Related manuals for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS

COOL 3D-PLUG-IN MADNESS II

Brand: Ulead Pages: 10

JUNOS PUS MOBILE SECURITY SUITE

Brand: Juniper Pages: 6

Brand: Blamsoft Pages: 28

Brand: Am Pages: 14

NETWORK BASIC - USER REFERENCE GUIDE 3.2

Brand: Red Hat Pages: 76

Brand: ARTEX Pages: 33

dc5750 - Microtower PC

Brand: Promise Technology Pages: 114

APPLICATION STACK 1.1 RELEASE

Brand: Red Hat Pages: 30

VANTAGE CNM 2.0 -

Brand: ZyXEL Communications Pages: 346

Brand: Draytek Pages: 60

Brand: Franklin Pages: 32

Topo North America 9.0

Brand: DeLorme Pages: 257

VB Directory System

Brand: VBrick Systems Pages: 21

StreamPlayer v4.4

Brand: VBrick Systems Pages: 32

SAMREPORT-LITE 2005

Brand: Macrovision Corporation Pages: 44

CONTRIBUTE 3 - DEPLOYING AND PUBLISHING...

Brand: MACROMEDIA Pages: 66

Brand: IBM Pages: 220

SyncMaster T23A950

Brand: Samsung Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands