Red Hat CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS Manual Download Page 16

Page: 16 / 108

Chapter 1. The LVM Logical Volume Manager

result in data corruption. If you have any concerns please contact your Red Hat service
representative.

Note

CLVM requires changes to the

lvm.conf

file for cluster-wide locking. For information

on configuring the

lvm.conf

file to support CLVM, see

Section 3.1, “Creating LVM

Volumes in a Cluster”

You configure LVM volumes for use in a cluster with the standard set of LVM commands or the LVM
graphical user interface, as described in

Chapter 4, LVM Administration with CLI Commands

and

Chapter 7, LVM Administration with the LVM GUI

For information on installing LVM in a Red Hat Cluster, see

Configuring and Managing a Red Hat

Cluster

1.4. Document Overview

This remainder of this document includes the following chapters:

•

Chapter 2, LVM Components

describes the components that make up an LVM logical volume.

•

Chapter 3, LVM Administration Overview

provides an overview of the basic steps you perform to

configure LVM logical volumes, whether you are using the LVM Command Line Interface (CLI)
commands or the LVM Graphical User Interface (GUI).

•

Chapter 4, LVM Administration with CLI Commands

summarizes the individual administrative tasks

you can perform with the LVM CLI commands to create and maintain logical volumes.

•

Chapter 5, LVM Configuration Examples

provides a variety of LVM configuration examples.

•

Chapter 6, LVM Troubleshooting

provide instructions for troubleshooting a variety of LVM issues.

•

Chapter 7, LVM Administration with the LVM GUI

summarizes the operating of the LVM GUI.

•

Appendix A, The Device Mapper

describes the Device Mapper that LVM uses to map logical and

physical volumes.

•

Appendix B, The LVM Configuration Files

describes the LVM configuration files.

•

Appendix C, LVM Object Tags

describes LVM object tags and host tags.

•

Appendix D, LVM Volume Group Metadata

describes LVM volume group metadata, and includes a

sample copy of metadata for an LVM volume group.

Summary of Contents for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS













































































































Search results

Summary of Contents for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS

Reviews:

Related manuals for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS

Brands by name

Popular brands

Red Hat CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS, Manual

Search results

Summary of Contents for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS

Reviews:

Related manuals for CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS

Brands by name

Popular brands