LIGHTING & REFUELLING
• This product is
ONLY
suitable for use with untreated wood, logs or La Hacienda HeatBlox.
• Prepare a sta
ck of loosely crumpled newspaper and place on top of the log grate.
• Pile finely split dry firewood or kindling on top of the paper.
• To light the newspaper, use long safety matches or a long nosed lighter.
• Once sufficiently alight, add logs or larger
pieces of untreated wood to the unit to increase the heat
slowly.
•
DO NOT
overload with fuel, only one or two logs is sufficient.
•
ALWAYS
use heat resistant gloves and the safety tool when adding fuel and handling the mesh
cover, as the unit will become very hot.
EXTINGUISHING
• To extinguish –
stop adding fuel and allow fire to die or douse with sand.
DO NOT
use water as this
may damage the product.
STORAGE
• When not in use, and if stored outside, cover the product once it has cooled completely with
a La
Hacienda weatherproof cover.
• Remove loose paint and rust with a wire brush when needed and re
-paint the product using La
Hacienda High Temperature Paint.
WARNING - DO NOT
over tighten bolts; only tighten with moderate pressure to avoid damaging the
bolts or components of the firepit.
Assembly diagram
