Red Epic Mysterium-X Page 73 Operation Manual Download

Page: 73 / 168

DISPLAY

The Display menu permits the operator to adjust the GUI elements displayed on the Viewfinder output(s)

Available options are FALSE COLOR, ZERA, OVERLAY, MODES, FRAME GUIDE, AREA GUIDES, and

MONITOR.

FALSE COLOR

When selected, forces the Viewfinder output(s) to display one of three false color modes - EXPOSURE,

VIDEO, FOCUS - plus RAW and MAGNIFY view modes. Default is OFF.

EXPOSURE

EXPOSURE displays a 2-color overlay that allows you to check minimum and maximum exposure levels

of the RAW sensor data, and hence prevent underexposed or overexposed images. When selected, the

icon “E√” will be displayed in the Lower Status Group.

The EXPOSURE meter’s color bands provide the following information:

PURPLE

Minimum Exposure

RED

Maximum Exposure

Between minimum and maximum exposure values, the image is displayed as a monochrome image.

Version 1.4.0 SVN 29352 BETA

APRIL 19, 2011

Summary of Contents for Mysterium-X









































































































































































Search results

Summary of Contents for Mysterium-X

Reviews:

Related manuals for Mysterium-X

Brands by name

Popular brands

Red Epic Mysterium-X, Operation Manual

Search results

Summary of Contents for Mysterium-X

Reviews:

Related manuals for Mysterium-X

Brands by name

Popular brands