Red Epic Mysterium-X Page 38 Operation Manual Download

Page: 38 / 168

If the red bar is not on the parameter you wish to change, first use the Scroll Wheel to position the red bar

under that parameter, then press ENTER, adjust with the Scroll Wheel and press ENTER a second time to

confirm the value change.

In the above GUI example, the Scroll Wheel has been used to move the red cursor to the Shutter Speed

parameter; and the ENTER key has been pressed. This reveals the Parameter Adjust Widow. Adjust the

value using the Scroll Wheel and then press ENTER to confirm the value change, then close the sub-

menu.

LIVE ACTION AREA

Contains the recorded image area plus Surround View™ look around area, plus overlays for Frame Guide,

Safe Action / Safe Title and the current Clip Name and Timecode values. Each overlay may be color

coded in one of 5 colors to maximize the contrast between the guide(s) and scene being captured.

Version 1.4.0 SVN 29352 BETA

APRIL 19, 2011

Summary of Contents for Mysterium-X









































































































































































Search results

Summary of Contents for Mysterium-X

Reviews:

Related manuals for Mysterium-X

Brands by name

Popular brands

Red Epic Mysterium-X, Operation Manual

Search results

Summary of Contents for Mysterium-X

Reviews:

Related manuals for Mysterium-X

Brands by name

Popular brands