RED DSMC MEDIA OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0047, REV-F | 47
UPGRADE REDMAG 1.8" SSD (512GB) FIRMWARE
NOTE:
Offload any data from the SSD before you upgrade it.
NOTE:
Upgrade the DSMC to firmware 5.1.44 or later before you upgrade SSD firmware.
1. Power up the DSMC, insert the REDMAG 1.8" SSD (512GB) into the DSMC, and format the SSD.
2. Properly eject the SSD from the DSMC.
3. Connect the SSD to your computer.
NOTE:
On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only
by default, which means that you are unable to write files (including firmware upgrade files) to the SSD.
Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.
4. Download the
REDMAG 1.8" SSD (512GB)
firmware from
5. Unzip the file.
6. Copy the
.rmf
file to the top level of the SSD directory.
7. Eject or unmount the SSD, and then remove the SSD.
8. Insert the SSD with .rmf file into your DSMC and verify that the SSD mounts properly.
9. Go to
Menu
>
Settings
>
Maintenance
>
Upgrade
>
Media
.
10. Select
Yes
and verify that the operation completes without error.
11. Remove the SSD from the camera as instructed by the on-screen instructions.
12. Re-insert the SSD into the DSMC.
13. Go to
Menu
>
Settings
>
Maintenance
>
System Status
>
Media Info
and verify that the Media Firmware Revi-
sion listed matches the firmware version that you downloaded.
14. Format the SSD before use.
