SWITCHING TO MANUAL MODE
To override the AUTO sensor mode and to use the light fitting as an ordinary light, it needs to be switched to
MANUAL mode. To do this, switch the unit off and on quickly within 1-2 seconds at the light switch. The light will
now remain permanently on regardless of the sensor settings.
To reset the light into AUTO mode, switch it off for approximately 30-60 seconds before switching back on.
NOTE: Avoid installing the Sensor near heating or an air conditioning outlet. Protect the lens from sharp objects.
PIR Sensors
Instructions Page 2
For models: PIR-B1, PIR-W1
Guarantee
This product is guaranteed for a period of 1 year from the date of purchase. The guarantee is invalid in the case of improper use, tampering, removal of the Q.C. date label,
installation in an improper working environment or installation not according to the current edition of the I.E.E. Wiring Regulations (BS7671). The guarantee is also
invalidated if the luminaire has been Mega tested. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and
return of the faulty unit. We do not accept responsibility for any installation costs associated with the replacement of this product. If a PIR is used in conjunction with any Red
Arrow lighting product we do not accept any responsibility for premature failure of lamps or control gear. Your statutory rights are not affected. We reserve the right to alter
specifications without prior notice.
Product complies with
all relevant European
standards
Product is suitable for
mounting on flammable
material
F
Red Arrow Trading
Elsworth House, Herries Road South
Sheffield, S6 1QS
T: 0800 195 0006 F: 0870 043 3946
E: [email protected] www.redarrowtrading.com
