Recsea WHS-RX100Mk II Manual Download Page 2

INTRODUCTION

SONY CYBER-SHOT DSC-RX100II  Waterproof Housing WHS-RX100Mk II

 

Thank you for purchasing the WHS-RX100Mk II Waterproof Housing.

 To ensure proper and safe use, please thoroughly read this manual.

 Improper use may cause leakage causing irreparable damage to your digital camera.

 Please check, and test the housing according to this manual prior to use.

Neither   NTF   Corporation,   Seatool/Resea   nor   their   agents   shall   warrant   or   bear   any 

responsibility   for   any   incident   related   to   water   leakage,   damage   or   loss   of   data, 

unauthorized modification, disassembly and repair; or any accident causing physical or 

material damage while using this product.

This product is manufactured by machining methods. As a result, there may be minor 

scratching or tool marks. These are a normal part of the manufacturing process, do not 

effect operation of the housing or camera, and are not subject to warranty or any other 

claims.

WARNING!

 

Do not store or leave housing in reach of infants or small children. The strap may cause 

chocking and suffocation, or small parts may be swallowed causing injury.

Please   remove   digital   camera   from   housing   when   not   in   use.   Battery   malfunction   or 

damage may cause fire.

 

The housing body is made of corrosion-resistant aluminum. However, saltwater can cause 

rusting so be sure to rinse thoroughly using fresh water without fail.

CAUTION!

 To prevent water leakage and damage, DO NOT disassemble or modify this housing.

 Do not store the housing in areas of high humidity, high or low temperatures, or areas of 

extreme temperature fluctuation. Doing so may cause deterioration of parts. 

 When diving, use a method of water entry that protects the housing from shock, which can 

cause water leakage. If at all possible have housing handed to you after entering the 

water.

 This housing is designed to withstand depths of 100 meters (328 feet). Using the housing 

at deeper depths may cause damage and water leakage. Use caution and monitor depth.

 

Remove O-ring or leave housing slightly open when transporting by plane. Pressurization 

of a sealed housing during transport may cause damage or make it difficult to open.

 When opening and closing the housing be mindful of dust and other contaminants, which 

may adhere to the O-ring, possibly causing water leakage and damage.

 Always check O-ring prior to each use. Pay special attention to the grease condition and 

that the O-ring is seated uniformly in the O-ring groove with no twists or bulges. Neglecting 

to check the O-ring prior to each use may result in water leakage and damage.

FEATURES OF THIS PRODUCT

 

Compacted and durable, precision machined corrosion-resistant aluminum housing.

 

Lightweight designed to withstand depths of 100 meters (328 feet).

 

Fixed Lens Port.

 

Original Secure-Latch locking mechanism for easy opening and closing. 

  

 

Front Port Control Ring. 

 

Rear Control Dial. 

 

Half-Press Shutter Trigger for precise camera shutter control. 

 

Double-wide O-ring and Back Cover contact surface for added protection at greater

    depths.

 

Complete camera function control. 

1

Summary of Contents for WHS-RX100Mk II













Reviews: