Recsea WHC-G1XMkIII, Manual

Page: 7 / 12

ATTACHING THE M67 MOUNT ADAPTER
1. Remove the Lens Port Protection Ring by turning it counterclockwise to expose the Lens
Port Threads.
2. Carefully screw the M67 Mount Adapter onto the Lens Port by turning it clockwise.
INTERNAL AND EXTERNAL STROBE
※
For heavy strobes and lights use optional grip & tray assembly and compatible connector.
※
Make sure camera flash is open before intalling camera into the houinsg. Be sure to
manually close the strobe once removed from housing.
※
Use the Strobe Mask-External Strobe Connection Mount to connect external strobe fiber
optic cable.
※
When not in use store Strobe Mask-External Strobe Connection Mount in a secure place
so as not to lose it.
1. Slide the Strobe Mask-External Strobe Connection Mount down and over the Flash
Window as required for attaching external flash cables.
2. Insert bear fiber-optic cable (INON) or plug (SEA&SEA) into sockets provided.
※
Two (2) Tripod Screw Sockets are provided at the bottom of the housing for use in
attaching Seatool/Recsea genuine tray and grip assemblies.
6.