2
ASSEMBLY INSTRUCTIONS
·
Release the tripod base and extend the support feet. (Figure 2.0, 2.1)
·
Remove the set screw from the receiving collar (A) on the housing
attachment.
·
Mount the screen by lining up the mounting stud (B) on the back of the
screen housing to the receiving collar (B) the tripod housing
attachment.
·
Fully insert stud and tighten the set screw (C) in place.
·
After tightening the set screw the screen can be rotated 90° to
switch between storage and display mode.
Screen
Housing
(B) Receiving Collar
(A) Mounting Stud
(C) Set Screw
