Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide
SYMPTOM: Discs do not load properly.
SOLUTION: Make sure the surface your printer is resting on is level. If necessary
use a bubble level to make sure the surface is level both front to back and side
to side.
SYMPTOM: Images are streaky, washed out, or have small white lines running
through them.
SOLUTION: Run the clean cartridge utility. See chapter 4 of the user’s guide.
SYMPTOM: The printer has stopped and will not resume and there is a disc in
the disc tray.
SOLUTION: Unplug the printer (at the back of the unit) open the cover, and man-
ually pull the drive tray forward until you can easily access the “stuck” disc.
Push the tray back into the printer, close the cover and reconnect the power
source.
SYMPTOM: There is ink on the outside edge or the inside hub of the discs.
SOLUTION: Use the disc alignment feature if you are using Discus to align the
disc. Or alter the mask settings, or center offset as necessary. See Pages XX-XX
of the Quick Start Guide.
