Recordex ReTract Plus, Instruction Manual

Page: 5 / 9

4
00-18
MARKER
FIG.1
00-16
00-01
00-10
00-05
00-04
00-01
00-04
00-05
00-10
00-18
MARKER
FIG.1
OCTAGONAL PLASTIC END CAPS
SQUARE PLASTIC END CAPS
SCREEN SIZE NUMBER OF TURNS
50" to 60" 7 to 8 turns clockwise
60" to 70" 8 to 10 turns clockwise
70" to 80" 10 to 12 turns clockwise
80" to 96"+ 14 to 16 turns clockwise
NOTE: If you need to re-assemble the spring and roller assembly follow these
steps.
·
Screw END A of the spring (00-16) to threaded part of the lock head
cover (00-05) until tight.
·
Insert END B of the spring (00-16) into the slot of the stop bar (00-08),
then attach the cover (star shaped) (00-09) to the stop bar.
·
The lock-head (00-04), tube (00-07), and the stop bar (00-08) are pre-
assembled at the factory.
00-04
00-17
00-05
00-07
00-06
END A
END B
00-08
00-09
FIG 2
PROBLEM: Through misuse the pull loop or pull bar may become damaged.
Solution: Replace the loop (00-15) and pull bar (00-13).
Remove the rubber end cap (00-12) from the pull bar, remove the pull bar, and
replace with a new one. Make sure the screen surface is flat when you insert
the rubber end caps to prevent wrinkles. It may be helpful to tape the sides of
the screen to the wall before you insert the new pull bar and replace the caps.