Recordex iMMCam AFX-120
Instruction Manual
Page 8
REMOTE CONTROL
Refer to the illustration below and the summary table for a description of the remote con-
trol function buttons.
Label
Description
NOTE: most buttons are defined in the table on page 8. This table de-
fines function buttons that only appear on the remote control.
B.W/C
Switch between black and white or color viewing
MIRROR
Displays mirror image of current presenter view
NEAR
Small nudge adjustment to AutoFocus
FAR
Small nudge adjustment to AutoFocus
SHARP+
Increase edge sharpness
SHARP-
Decrease edge sharpness
TEXT
Increase text sharpness (toggle text/graphic
mode)
AWB
Auto white balance the image
RESET
Reset image settings
BLUE+
Increase blue color level (manual white balance,
remote control function only)
BLUE-
Decrease blue color level (manual white balance,
remote control function only)
RED+
Increase red color level (manual white balance,
remote control function only)
RED-
Decrease red color level (manual white balance,
remote control function only)
SPECIAL FUNCTIONS
Changing Output Resolution.
The default output resolution of the camera is SXGA
(1280x1024 @60Hz). The VGA/HDMI output resolution can be changed to XGA (1024x768
@60Hz), SXGA (1280x1024 @60Hz), WXGA (1280x720 @60Hz). To do this press the AUTO
button on base control panel and hold it down for three seconds. Doing so will cycle the
camera through the three output resolutions 1024x768, 1280x800, 1280x1024. NOTE: Not
all display devices will be able to accept all resolutions.
Ÿ
CAUTION:
IMAGES SAVED USING THE CAMERA REMOTE OR CONTROL PANEL TO IN-
TERNAL SESSION MEMORY ARE DELETED WHEN THE CAMERA IS POWERED OFF.
Summary of Contents for iMMCam AFX-120
Page 1: ...ENGLISH X 120...