RecorderGear B200W, User Manual

Page: 9 / 38

9
inserted & slide the power switch to
the ON position.
B.
The side indicator light will light up
blue for about 5 seconds & then turn
OFF. After about 15 seconds, the light
will turn back on for 20 seconds & then
turn back OFF for 10 seconds. After the
10 seconds, it will begin flashing.
C.
Once the blue light begins flashing
continuously, recording has begun.
NOTE:
When the B200W is connected
as a Wi-Fi IP camera, the side indicator
light will no longer flash, but be a solid
blue light. To turn off the indicator
light,
see section 9-2D.
2. Motion Detection Recording
Before changing the mode to motion
detection, download & connect the
camera to the RecorderGear App (See
sections 6-8) .