background image

7

3. Record Power Guarantee

Products

” means the Products sold by Record Power subject to these 

terms and conditions;

Record Power

” is Record Power Limited, whose company registration 

number is 4804158 and registered office address is Centenary House, 11 
Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA and sells 
through a network of Authorised Dealers;

Authorised Distributor

” is the nominated importer for your region 

who will generally sell through a network of Authorised Dealers.  Details of 
Authorised Distributors for specific countries can be found in the Product 
manual or at www.recordpower.info;

Authorised Dealer

” is a retailer or business authorised to sell Record 

Power Products to end users. 

Guarantee 

1.1

    Record Power guarantees that for a period of 5 years from the date 

of purchase the components of qualifying Products (see clauses 1.2.1 
to 1.2.9) will be free from defects caused by faulty construction  
or manufacture.

1.2

    During this period Record Power, its Authorised Distributor or Au-

thorised Dealer will repair or replace free of charge any parts which 
are proved to be faulty in accordance with paragraphs 1.1 above 
provided that:

1.2.1

  you follow the claims procedure set out in clause 2 below;

1.2.2

   Record Power, our Authorised Distributor or Authorised Dealer are 

given a reasonable opportunity after receiving notice of the claim to 
examine the Product;

1.2.3

   if asked to do so by Record Power, its Authorised Distributor or 

Authorised Dealer, you return the Product, at your own cost, to 
Record Power’s premises or other approved premises such as those 
of the Authorised Distributor or supplying Authorised Dealer, for the 
examination to take place;

1.2.4

   the fault in question is not caused by industrial use, accidental dam-

age, fair wear and tear, wilful damage, neglect, incorrect electrical 
connection, abnormal working conditions, failure to follow our 
instructions, misuse, or alteration or repair of the Product without our 
approval;

1.2.5

   the Product has been used in a domestic environment only;

1.2.6

   the fault does not relate to consumable Products such as blades, 

bearings, drive belts or other wearing parts which can reasonably 
be expected to wear at different rates depending on usage (for full 
details contact Record Power or your local Authorised Distributor);

1.2.7

    the Product has not been used for hire purposes, by you or by a previ-

ous owner;

1.2.8

   the Product has been purchased by you as the guarantee is not trans-

ferable from a private sale.  

1.2.9

   where the Product has been purchased from a retailer,  the 5 year 

guarantee is transferable and begins on the date of the first purchase 
of the Product and in the event of a claim under this guarantee proof 
of the original purchase date will be required to validate the  
warranty period.

Claims Procedure

2.1

    In the first instance please contact the Authorised Dealer who sup-

plied the Product to you. In our experience many initial problems 
with machines that are thought to be due to faulty parts are actually 
solved by correct setting up or adjustment of the machines. A good 
Authorised Dealer should be able to resolve the majority of these 
issues much more quickly than processing a claim under  
the guarantee.

2.2

    Any damage to the Product resulting in a potential claim under the 

guarantee must be reported to the Authorised Dealer from which it 
was purchased within 48 hours of receipt.

2.3

    If the Authorised Dealer who supplied the Product to you has been 

unable to satisfy your query, any claim made under this Guarantee 
should be made directly to Record Power or its Authorised Distributor 
(for details of the Authorised Distributor in your country please see 
your Product manual or check www.recordpower.info for details). The 
claim itself should be made in a letter setting out the date and place 
of purchase, and giving a brief explanation of the problem which 
has led to the claim. This letter should then be sent with proof of the 
purchase date (preferably a receipt) to Record Power or its Authorised 
Distributor. If you include a phone number or email address this will 
help to speed up your claim.

2.4

   Please note that it is essential that the letter of claim reaches Record 

Power or its Authorised Distributor on the last day of this Guarantee 
at the latest. Late claims will not be considered.

Limitation of Liability 

3.1

    We only supply Products for domestic and private use.  You agree not 

to use the Product for any commercial, business or re-sale purposes 
and we have no liability to you for any loss of profit, loss of business, 
business interruption or loss of business opportunity.

3.2

   This Guarantee does not confer any rights other than those expressly 

set out above and does not cover any claims for consequential loss or 
damage. This Guarantee is offered as an extra benefit and does not 
affect your statutory rights as a consumer.

Notice 

 

 

This Guarantee applies to all Products purchased from an Authorised 
Dealer of Record Power within the United Kingdom of Great Britain 
and Northern Ireland. Terms of Guarantee may vary in other coun-
tries – please check with the Authorised Distributor in your country 
(details of the Authorised Distributor for your country can be found in 
the manual or at www.recordpower.info).

Summary of Contents for FM25 Series





















Reviews:

Related manuals for FM25 Series