7
Unpacking and Cleaning
1. Carefully lift the lathe from the carton and check that all of the components and contents have been
included. Place parts on a protected surface.
2. Clean all rust protected surfaces with white spirit. Do not use gasoline, paint thinner, mineral spirits,
etc. These may damage painted surfaces. Make sure the area is well ventilated and that there are no
naked flames or sources of ignition.
3. Set packing materials and shipping carton aside. Do not discard until the machine has been set up
and is running correctly.
5. Specifications
6. Contents of the Package
Voltage:
230 V
Frequency:
50 Hz
Motor input P1:
0.375 kW
Motor output P2:
0.25 kW
Motor speed:
1400 rpm
Full load current:
1.6 A
Max. bowl diameter:
254 mm (10”)
Max. between centres:
457 mm (18”)
Max. swing over bed:
254 mm (10”)
Spindle speeds:
450, 980, 1550, 1940 and 2640 rpm
Taper:
2 Morse Taper
Spindle travel:
44.5 mm
Size:
L902 x D267 x H375 mm
Weight:
34 kg
Spindle Thread:
M33 x 3.5
Sound Pressure Level:
No load 59.3 dB(A)
Sound Power Level:
No load 72.3 dB(A)
Measurement uncertainties: 3 dB(A). Tested according to EN 62841-1.
1
Lathe with faceplate, tool rest holder, tool rest and tailstock installed
2
38 mm spindle wrench
3
46 mm faceplate wrench
4
3 mm hex wrench
5
4 mm hex wrench
6
5 mm hex wrench
7
Revolving centre
8
4 prong drive centre
9
Knockout bar
10
Rubber feet x 4
11
Tailstock hand wheel handle
1
2
3
7
8
9
10
11
4
5
6
Summary of Contents for DML250
Page 35: ...35 ...