16
9. Assembly of the Optional 25600 Fine Filter
Cartridge for CX2500
Add the M10 washer,
Fig 9.9
, and the cleaning mechanism operating
handle,
Fig 9.10
. Note that the flat section of the hole in the operating
handle should be positioned so that it slides over the corresponding flat
section of the thread. The handle should now be positioned as shown in
Fig 9.11
.
Add the M10 spring washer and M10 domed nut as shown in
Fig 9.12
.
Tighten the domed nut in order to secure the operating handle. At this stage
the half nut can be adjusted to the correct position so that the operating
handle does not foul the top plate of the filter cartridge. Ensure that both the
domed nut and half nut are fully tightened,
Fig 9.13
.
The filter cartridge can now be fitted to the CX2500 using the securing strap
provided.
Fig 9.9
Fig 9.10
Fig 9.11
Fig 9.12
Fig 9.13
CX2500 Manual 3.2.indd 16
24/11/2016 12:06
