14
4. Machine Assembly
- cont.
Fig.4.4
TRUNNION
Fig.4.5
TRUNNION
TABLE FIXING BOLT & WASHER
4.2 Rise & fall hand wheel
Attach the rise and fall hand wheel to the rise and fall shaft and tighten
the socket head bolt with a 6 mm hex wrench, then attach the handle and
tighten with a 10 mm spanner
(See Fig.4.2).
4.3 Belt tension handle
Attach small crank handle to belt tension and speed mechanism with
10 mm spanner (not supplied)
(See Fig.4.3).
4.4 Fitting the table
Tools Required: - 13 mm spanner (not supplied)
With the help of another person, lift the working table onto the trunnion.
Mount the working table on the trunnion using the supplied 4 x table
fixing bolts and 4 x washers
(See Fig.4.4 front view & 4.5 rear view).
4.5 Fitting the tension knob
To fit the tension knob, slot it into the keyway on the top of the bandsaw.
Fig.4.6
.
Fig.4.3
BELT TENSION & SPEED CHANGE
Fig.4.2
RISE & FALL
Fig.4.6
TABLE FIXING BOLT & WASHER
Summary of Contents for BS350S
Page 32: ...32 13 Parts Diagrams cont ...
Page 33: ...33 13 Parts Diagrams cont ...
Page 34: ...34 13 Parts Diagrams cont ...
