11
3. Stand & Wheel Kit Assembly
- cont.
3.3 Wheel Kit Assembly
1. Attach the fixed wheels to the rear legs of
the machine stand using the M6 x 16 hex bolts,
Washers, and M6 nuts provided.
Fig 3.8
.
The rear of the stand is the side which features
the medium mid brace support.
2. Assemble the D-handle to the front short top
brace of the stand, using the D-handle brackets,
M6 x 16 Hex bolts, Washers and M6 Nuts
provided.
Fig 3.9
.
3. Fully tighten all of the fixings to secure the
wheels and handle assembly (take care not to
over tighten the fixings as damage to the threads
may occur).
PLEASE NOTE: For your safety only use
the handle to pull the machine. It is
unsafe to push the machine using the
handle.
When lifting the stand ensure the front
legs are not raised higher than 200 mm
from the ground (or at an angle of more
than 17º).
Fig.3.8
Fig.3.9
HANDLE
BOLTS & NUTS
i
Kg
Summary of Contents for BS350S
Page 32: ...32 13 Parts Diagrams cont ...
Page 33: ...33 13 Parts Diagrams cont ...
Page 34: ...34 13 Parts Diagrams cont ...
