12
• If you notice any transport damage while unpacking,
notify the supplier immediately.
• Dispose of the packing in an environmentally
friendly manner.
You should take into consideration how and where you will
place the unit:
• It can be placed on a bench or be hung from the ceiling.
• This unit will work best if it is located away from corners,
and heating/cooling vents.
• If using on sawhorses the air filtration unit should be
clamped in place.
• This unit is specifically designed to circulate and filter
non-metallic dust, which is generated throughout the
work area.
Fig 2
Tools required for assembly:
No 2 Phillips screwdriver (not supplied)
10mm wrench (not supplied)
1. Remove all packing from inside of the unit by removing
the outer filter and inner filters.
2. The air filtration unit can be hung from the ceiling.
Remove four screws from cabinet top (Fig 2, A).
3. Hang the unit using four hook bolts (Fig 2, B), and four
hex nuts (Fig 2, C) provided.
4. The lock nut needs to be threaded almost all the way up
the eyebolt. Screw the eye bolt into the hole and tighten
lock nut against the cabinet top. You will need to hold
the eyebolt so it does not spin while tightening the
lock nut.
5. Repeat steps for remaining three eyebolts.
6. Drill holes and securely mount the four mounting hooks
provided in the ceiling and use the provided sections of
chain for mounting your air filtration system.
Original Instruction Manual |
AC400
Air Cleaner | Version 3.0 | November 2012
7. Assembly
Caution:
Mounting hooks must be anchored to a
building structure which can support a minimum of
45 kg. Never mount to surfaces such as dry wall or
false ceiling grids, etc.
Note:
Hang the unit at least 2.13M above floor level.
C
B
A
Summary of Contents for AC400
Page 19: ...19 ...