FCC Guidelines
FCC Guidelines
The usage of the Recon Scout® robot and related equipment is subject to the
following conditions:
Eligibility is limited to state and local police and firefighters eligible for licensing
under Section 90.20(a)(1) of the Commission’s Rules, and security personnel in
critical infrastructure industries.
The Recon Scout robot may be used only during actual emergencies involving
threats to safety of life, and for necessary training related to such operations.
Security personnel in critical infrastructure industries may operate the Recon Scout
robot only in areas that are environmentally hazardous for entry by human
personnel, and for necessary training related to such operations.
Training operations are not permitted within thirty kilometers of the following
Federal radiolocation sites:
The Recon Scout robot will operate on a secondary basis (cannot cause interference
and is not protected from interference) to all Federal users and licensed non-Federal
users.
This device may not interfere with Federal stations operating in
the 420-450 MHz band and must accept any interference received.
Site Coordinates
(degrees-minutes-seconds)
Beale Air Force Base
39-08-10 N / 121-21-04 W
Cape Cod Air Force Station
41-45-07 N / 70-32-17 W
Clear Air Force Station
64-55-16 N / 143-05-02 W
Cavalier Air Force Station
48-43-12 N / 97-54-00 W
Eglin Air Force Base
30-43-12 N / 86-12-36 W
Site Coordinates
(degrees-minutes-seconds)
Arecibo, Puerto Rico
18-20-37 N / 66-45-11 W
Westford, Massachusetts
42-37-24 N / 71-29-18 W
Poker Flats, Arkansas
65-07-47 N / 147-28-14 W
TM
ii
FCC Logbook
FCC Logbook
The usage of the Recon Scout robot is subject to maintenance of a logbook. Please
use the following sheet to record the date of operation, the start and stop times,
channel information, the location of usage, a brief reason for usage and a point of
contact. This logbook must be made available upon request of the Federal
Communications Commission or the National Telecommunications and Information
Administration.
Refer to your User’s Manual for serial numbers and channel information. The next
page may be photocopied, or additional pages are available from your authorized
ReconRobotics dealer.
Date Start Stop
Location
Reason
POC
iii
