STEP2: Peel off the 3M sticker's cover
TEP3: Place the RB1 on a perfectly flat surface.
Surface mount:
This method will allow you to mount
the RB1 on any perfectly flat surface. Using this
method will not require any cutting or drilling of the
surface.
STEP 1: Place the RB1 cables in the rail found on the
inner side of the surface mount plate, and screw the
plate to the back of the RB1, using the 2 M4 cross
head screw. Then stick the 3M Sticker on the back of
the surface mount plate.
Mounting
WATERPROOF BLUETOOTH CONTROLLER
RB1
