Setup
Please Note: Once Recoil RB1 sees power, it will always try and pair as shown by
the flashing POWER BUTTON. If you do not have a paired device with you while
riding, the light will continue to flash.
Main Key pad Controls
Pairing Bluetooth
®
Device
Go to settings on your phone and place Bluetooth
®
setting into " discoverable"
mode.
Search for (RB1)device.
On phone select (RB1) to pair device.
Once a device is paired each time this device is seen by the Recoil RB1, it will
automatically reconnect to the device. If no device is present the Recoil RB1
automatically goes into pairing mode and will present itself as discoverable for
the next device present.
AUX Input
Connect AUX Input with any media player(MP3 player, Smartphone, Headunit)
Double tap AUX/Power button rapidly to switch between Bluetooth source and
AUX input source.
When Recoil RB1 is switched to AUX input source, the Green LED stays on.
Double tap the AUX/POWER button agian and the Green light will shut off,
indicating the unit is now out of AUX mode. The bluetooth device can now
once again be used and controlled by the key pad.
Note: When the unit is in AUX mode, only the VOLUME of peripheral audio
device can be controlled, Track Forward/Backward and Play/Pause buttons do
not control anything with peripheral audio device!
Press and hold the AUX/POWER button for few seconds to turn the Recoil RB1 ON. Do the
same to turn it OFF. As mentioned above, double tap it to switch between Aux and
Bluetooth
®
modes.
The "track up" button allows you to "skip forward" to the next song saved on your Bluetooth
®
device. Pressing the "track down" button once allows you to go back to the start of the
song your' re currently listening to. Press it a second time and go to the start of the song on
your device before the one your' re listening to.
The play pause button allows you to pause your Bluetooth
®
device from playing. Press
the same button again and your device will start to play.
WATERPROOF BLUETOOTH CONTROLLER
RB1
