Some wake towers allow for the wiring to be ran though the tower. Locate the
desired location of the speaker, drill a 3/4" hole and route the speaker wire with
the attached connector down through the wake tower. Drill a hole at the
bottom and then continue to the amplifier for termination. Use a grommet when
running any wire thru a metal hole.
POWERSPORTS CAN SPEAKERS
R65
CAN WIRE ROUTING
Option 1:
R65 speakers are terminated with a waterproof DIN connector. The pigtail
contains a (+) and (-) 18 AWG speaker wire and a female Micro DIN connector
for termination of the RGB lighting. Terminate the speaker wires to the speaker
wire output on the amplifier. You wilI need to purchase separately our
RGBLED-4C controller with (4) male Micro DIN outputs that will control (4) speak-
ers via the Micro DIN connector located on the pigtail. The RGBLED-4C is APP
driven with the EZ RGB APP which is available for both IOS and Android.
RGB / SPEAKER WIRE TERMINATION
12 ft. 6 Conductor Speaker/RGB wire
ATTACHED LED/SPEAKER PLUG
Micro-DIN
Speaker Wiring
Tower Tube
3/4" Hole
Rubber grommet
(Not included...But recommended)
