HandPunch 2000 Installation and Operations Manual
9
General Setup
The following is a list of typical set up items
needed before enrolling users. The detail for each
menu follows this overview.
Note: It is not necessary to leave the command
mode after each item is set as shown in the detailed
descriptions.
•
Set Language
•
Set Date Format
The first two items in the setup menu allow the
reader to be “localized” for a variety of countries.
•
Set Time and Date
For units not networked to a PC it is important to
set the time and date. Units networked to a PC
typically receive the time and date from the PC.
•
Set ID Length
Setting the ID length can reduce the number of
keystrokes needed to enter the ID number by
eliminating the use of the # or ENTER key to
complete ID number entry.
•
Set Address
The default setting (1) is typical for this
application. Change only if your application
requires a different address.
•
Set Serial
Set the network communcation baud rate The
default is 9600 bps.
SET TIME AND DATE
* NO YES #
SET ID LENGTH
* NO YES #
SET ADDRESS
* NO YES #
SET SERIAL
* NO YES #
SET DATE FORMAT
* NO YES #
SET LANGUAGE
* NO YES #
