User Manual for Mobile DVR
39
Remote ID
Picture 5
8.
F.A.Q
Problem 1: The power indicator not bright after power on.
The following reasons will cause the power indicator not works:
1) Electric voltage isn’t within the range of 8-36 V;
2) The fuse in power cable was burned;
3) ACC setting failure or ignition connects in a wrong way
Problem 2: ERR indicator keep on light.
The following errors will cause the ERR indicator keep on light.
1) Two SD cards didn't be inserted.
2) The system partition under abnormal statues, even the SD card be inserted, it also can cause the
equipments can not be identified;
3) MCU not works;
4) SD card cannot read and write in normal;
Problem 3: Channel indicator not works
The following reasons will cause the Channel indicator not works:
1) No video signal input;
2) Cameras break down;
RECODA
