Beijing Reci Laser Technology Co., Ltd
User Guide for FCA Series Hand Laser Welding System
27
NO MODULE DESCRIPTION
FUNCTION
Temperature
Display temperature sampling value.
Set current
Display the set current value corresponding to the current
power.
Red light
Display red indicator light current value.
3.
Fault
As shown
The light is on to indicate that the corresponding fault has
occurred.
4.
System
information
Machine number The number of the laser device.
Hardware
version
The hardware version of the device.
Firmware
version
The firmware version of the device.
Remaining time The remaining time of the device.
Running time The running time of the device.
5.3
Setting Page
The Page is just as the figure 5.4. The function of the different button is as the following table
5.2.
Figure 5.4 Setting Page
The function of the setting page is shown in the table below:
Table 5.2 The function of the buttons on Setting Page
NO
MODULE DESCRIPTION
FUNTION
1.
Serial port
setup
Port Number
Drop-down box to select the corresponding serial port.
Open port button Open the corresponding serial port.
Set default
Set the corresponding serial port to the default serial port.
The next software restart will automatically open the serial
1
2
3
4
5
7
8
6
