© 1995-2010 ReChargX, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the ReChargX and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved.
TonerRefillKits.com
Mon - Fri 8am - 5pm ET
800.527.3712 or 352.343.7533
RechargX RX163
2010.07.12
Page 6
Step 12: Secure the Reset Chip
If the chip sits very loosely in the slot, a tiny
bit of tape can be used on the top of the chip
to hold it in place, as shown in figure 13 -
DO
NOT COVER THE BRASS CONTACTS!
Step 13: Locate the Waste Hopper
Orient the cartridge on your work surface with
the handle of the toner cartridge closest to
your chest.
Flip over the cartridge 180 degrees away
from you so cartridge is upside down with the
cartridge handle away from your chest.
Once flipped and rotated, the chip will be
facing toward the surface on the bottom-right
side closest to your chest.
The white arrows, in figure 14, show the
direction the toner cartridge must be turned
to locate the waste hopper.
Figure 13
: Cartridge reset chip in place with tape
Figure 14
: Locating the waste hopper
