© 1995-2010 ReChargX, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the ReChargX and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved.
TonerRefillKits.com
Mon - Fri 8am - 5pm ET
800.527.3712 or 352.343.7533
RechargX RX163
2010.07.12
Page 4
You will be using this cloth to clean the outside
of the toner hopper hole to ensure the
ReChargX leak-proof seal will be applied firmly
to the cartridge, as shown in figure 7.
(
Note
: Only use the toner grabber cloth on
the exterior of the toner cartridge around the
toner hopper hole area. Do not use the cloth
to clean any of the internal components or
the cartridge imaging drum.)
Step 7: Seal the Toner Hopper Hole with
the ReChargX Leak-Proof Seal
Remove the protective backing from the
ReChargX leak-proof seal and lower the seal
around the toner hopper hole.
Press firmly around the entire seal to ensure
the seal securely sticks to the toner cartridge,
as shown in figure 8.
Step 8: Reset Chip Location
The next step of the ReChargX RX163
Premium Print Toner Refill instructions is to
replace the toner cartridge reset chip.
Notice the location of the reset chip on the
top-right side of the toner cartridge, as shown
by the circle in figure 9.
Step 9: Remove the Plastic Tabs
The toner cartridge reset chip is held in place
by two small plastic tabs. These tabs must be
removed before the cartridge reset chip can
be removed, as shown in figure 10.
Gently pry up on each of the cartridge reset
chip tabs to break them so the chip can be
removed from the cartridge.
Figure 8
: Toner hopper with ReChargX leak-proof
seal in place
Figure 9
: The toner cartridge reset chip
Figure 10
: Cartridge reset chip tab removal
