ReChargX
™
RX160
8am - 8pm ET Mon - Fri
© 1995-2014 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V4.0 - 2014.04.22
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 2 of 10
Step 1: Prepare your work surface
Included in the ReChargX
TM
RX160 premium print
toner refill kit is a sheet of newsprint (figure 1-1).
Unfold the sheet and lay it across your work surface.
The newsprint keeps your work surface clean and is
discarded after completing the refilling process.
Step 2: Position the drum unit and toner
cartridge assembly
When you remove the toner cartridge from your
printer, the drum unit will still be attached. Position
the assembly on your work surface so the handle
on the front of the toner cartridge (A) is facing you
and the green or blue tab (B) is on the right-hand
side (figure 2-1).
Step 3: Separate the toner cartridge from
the drum unit
Press and hold down the green or blue tab (A)
located on the right-hand side of the drum unit (figure
3-1) while lifting up on the handle on the front of the
toner cartridge with your left hand to separate the
toner cartridge from the drum unit.
Lift the toner cartridge up and off of the drum unit.
Note
: Since the drum in the drum unit can be easily
scratched or damaged, put it out of harm’s way until
we are completely finished with the refilling operation.
Step 4: Prepare the cartridge for refilling
Position the cartridge on your work surface so the
handle (A) is facing toward you and the developer
roller (B) is facing away from you (figure 4-1).
Figure 1-1:
ReChargX™ newsprint work surface protector
A
B
Figure 2-1:
Positioning the toner cartridge and drum assembly
A
B
Figure 3-1:
Pressing the colored tab to remove the toner
cartridge from the drum unit
A
B
Figure 4-1:
Brother toner cartridge after being separated from
the drum unit
