11
Operating Instructions
This cordless hedge trimmer is designed exclusively for cutting garden hedges in your
private domestic gardens. Please note that this tool is not designed for commercial, trade
or industrial use. Only use this product for the purpose specified in these instructions. Any
other use will void the guarantee.
For Your Safety:
Warning! Personal Injury and Damage!
Keep your hands and feet away from the cutting tool, especially when the products are
switched on! Never switch on the product while you are adjusting the handle.
Remove battery before adjusting or cleaning and before leaving the machine
unattended for any period. Caution!
Do not touch the moving blades.
Important!
Any use which is not expressly permitted in the manual may result in
damage to the machine and place the user in serious danger. Please carefully read the
restrictions in the safety instructions.
Important! Before each use, check for damaged / worn parts and especially check
the blade for proper alignment.
Cutting hedge
Before cutting, check the hedge for foreign objects e.g. wires.
When using the too, hold it away from yourself and stand in a secure position with your
weight evenly balanced over both feet.
Cuts stems up to 15 mm
(5/8”) in thickness. When cutting, move steadily along the line
of cut so that stems are fed directly into the cutter blades. The double edge cutting
blade enables cutting in either direction or with a side to side motion.
Cut the sides of the hedge first and then the top.
To keep the sides flat, cutting upwards with the growth is recommended. Younger
stems tend to move outwards when cutting them from top to bottom, resulting in
shallow patches or holes in the hedge.
To reach a level finish, fasten a piece of string along the length of the hedge at the
required height and use as an alignment guide. Cut the hedge just above the string.
After use, replace the blade transport guard.
