17
F- Boiler screen
36- Emergency state on the boiler
(if there are no emergency states, a boiler
icon will be displayed)**
User menu
Temperatures
Heating temperature
In the weather mode (with an external sensor), room temperature is set (adjustment range
from 5 up to 30 degrees C). For configurations without a room sensor (configured by the
Service), the control range for this parameter equals the boiler temperature level.
HW temperature
Set the hot water temperature in the dispenser.
SYMBOLS
The most frequent used functions of the regulator are put in m
>Symbols
Turning on the boiler
1. Prior to turning on the boiler, make sure there
is fuel in the burner. To do so, turn on the burner
for a short period of time.
>Manual mode >Manual control>
2. Activating the turn-on process:
>Symbols>Turning on
3. Information about the turn-on state on the
screen
4. The regulator will finish the turn-on process
after detecting fire in the furnace chamber. The
regulator will switch into BURNING mode.
Warning!
It may be impossible to turn on the boiler when:
The controller is in the burning state
The turn-off process has been activated
The controller is sustained
The turn-on process was started earlier
