REC Indovent AB, Box 37, 431 21 Mölndal
|
tel.031-675500
|
www.rec-indovent.se
6
OPERATION & CONTROL
Ventilation Unit RT 250/400S-EC-RS
General
This is a description of the basic functions that you can modify to suit your own preferences and circumstances.
The unit
’s control system optimizes the function according to the settings you make. As a user of the air handling
unit it is good to know the following:
In the menus for heating and cooling, where you as a user have the possibility to make changes, the
“auto mode”
is the most optimized function. Should you choose a manual setting, On or Off, the manual settings take
precedence.
Control unit
Up
Down
Right
Left
Confirm
Show alarm
Delete
Alarm
Flashing
There are one or more alarms that have not been acknowledged.
Steady
There are one or more acknowledged alarms left.
Setting
Flashing
You are in a menu where it is possible to change some parameters.
Steady
You are now in change position.
Menu system.
The unit
’s various settings and the status of different values such as temperature etc. Can be viewed by scrolling
around in the menu system. Certain parameters and operational settings can also be changed. No basic system
configurations can be changed without authorization code (technician level).
There is a main menu that the system automatically reverts to approx. 25 minutes after the keys have been last
touched. The system also automatically logs you out after this time if you have logged in with a code.
How to change values and settings
Scroll to the desired menu using the arrow keys. Press
“OK”, and the adjustable variable will start blinking.
Change with the up or down arrow keys. Moving between lateral positions is done with the right or left arrow key.
When the correct value is set, confirm with
“OK”. The cursor then moves to the other alterable variable in the
same menu.
OK
C
REC TEMOVEX
Mode: Normal
Status: Heating 100%
Temp. : 21.0 °C
↓
OK
C
