REC Indovent AB, Box 37, 431 21 Mölndal
|
tel.031-675500
|
www.rec-indovent.se
14
OPERATION & CONTROL
Ventilation Unit RT 250/400S-EC-RS
6. Alarm
Current alarm
Current alarm and its status can be seen by pushing the red button.
Here the alarms may also be acknowledged, blocked or unblocked (allow alarm).
An alarm that was confirmed, but where the error was not fixed will show as a confirmed error in the menu. As
soon as the error is fixed it will disappear from the menu (since it is already confirmed).
You can also block an alarm in order to run the unit despite the alarm.
NOTE!
This you should not be done
without proper knowledge, since it may cause danger and in worst case damage to property.
Alarm history
This shows the 21 latest alarm activities. E.g. when the alarm was triggered, when it was confirmed and/or reset
etc. No alarms may be confirmed, blocked etc here.
7. Load settings
This reloads previously saved settings into the DUC, or if you have never saved anything the default settings.
All settings are loaded except date and time.
|
~
€
|
Sensor error OD
Temp
28 Feb 15:20 Klass:A
↓
Any menu
Back to previous menu
El.heat. overheated
↑
28 Feb 14:34 Klass:A
El.heat. overheated
►Acknowledge
Block
OK
|
}
~
€
28 Feb 15:20 A
↑
El.heat. overheated
Activated
↓
Cont
’d. from Alarm history p.7
28 Feb 13:50 A
↑
Sensor error OD
temp
Acknowledge
↓
|
}
Load saved
Settings:
No
Cont
’d from Load settings p. 7
