Version Number: RBM1550-20210414A1
15
2.4 Install wire spool
0.030”(0.8mm)/0.040”(1.0mm)diameter
4”（100mm 1kg）wire spool
2.5 Set drive roll
Face the side marked 0.030” away from the machine
Remarks: 1. There are two grooves on one wire feed wheel, one side is 0.030” (0.8mm) and the other
side is 0.040” (1.0mm) to match the corresponding wire diameter.
2.Gear wire feed wheel, gear wire feed wheel is suitable for flux-cored welding wire, our
standard configuration has 1 piece of 1kg flux-cored welding wire, which can be directly installed
and used.
2.6 Feed wire and set pressure
The pressure should not be too loose, too loose will cause the welding wire to slip and the wire feeding is
unstable, and too tight will cause the welding wire to slip and deform.
