Version Number: RBM-1350 20210712A2
1
Operation Manual
RBM1350(MIG135E)
welding machines adopts the latest pulse width modulation (PWM) technology and
insulated gate bipolar transistor (IGBT) power module, which can change work frequency to medium frequency so as
to replace the traditional Transistor transformer with the medium frequency transformer. its characterized with
portable, small size, light weight, low consumption and etc. It is also an intelligent and easy-to-operate welding
machine with MIG gasless. It has the characteristics of strong welding performance and diversified usage scenarios.
It can be used in gasless conditions, and the welding effect is excellent
，
It has very little spatter during welding. It is
highly praised by welding enthusiasts. It is also very friendly to beginners in welding and can quickly get started.
Part 1: Machine Introduction
1. Power indicator
Power on, this light will be on.
2. Fault light
When the welding load is overloaded and the output current of the machine is too large, this light will be on. This situation is
normal and the machine can be restored; when there is damage inside the machine, this light will be on. In this case, the
machine is abnormal and requires maintenance
3. Adjust the value knob
Turn on the power
，
Clockwise rotate to enlarge the current, and anti-clockwise rotate to reduce the current.
4. MIG Welding torch connector
5. Positive Terminal
Connect the ground wire
Part 2: Introduction to the product and configuration list
