Rebel URZ0938, User Manual

Page: 5 / 11

CHARGING
1. Connect the micro USB plug to micro USB port on the flashlight.
The other end should be connected to a charger or a device
such as a computer or laptop.
2. Charging is indicated by flashing red LED.
3. Fully charged battery will be indicated by flashing green LED.
4. Charging time from 0 - 100% is about 2,5 h.
5. Charge the battery before its fully discharged.
SPECIFICATION
• Motion sensor
• Charging via micro USB input
• Power: 3 W LED + 2 red LEDs
• Light modes: 3 W – 100%, 50%, blinking; 2 LED (red) – constant
light, blinking
• Light range: 40 m
• Luminous flux: 120 lm
• Work time: 4 -20 h
• Power supply: built-in battery 3,7 V 1200 mAh
• Weight: 74 g
• Dimensions: 60 x 40 x 35 mm
• In set: Micro USB cable, users manual
8 9
EN EN
It is forbidden to place equipment waste marked with the symbol of a crossed-
out trash bin together with other waste. This equipment is subject to collection
and recycling. The harmful substances it contains can cause environmental
pollution and pose a threat to human health.