10
EN
OPERATION
1. Turn on/off the light on the top by pressing the ON/OFF button.
2. Extend the top LED head to reveal and turn on the front light. Retract
it to turn off the front light.
HOW TO CHARGE
•
Turn off the torch before charging.
•
Connect the AC charger/car charger to power mains, connect the
other plug to the charging socket of the work lamp. Red LED indicator
will be on during charging. When the battery is fully charged, green
LED is on. Disconnect the AC charger/car charger from the device
and power mains.
Note: The battery may get slightly warmer during charging. It’s normal
phenomena, and does not effect proper operation of the lamp.
MAINTENANCE
•
Use a soft, damp cloth to clean the housing of the lamp.
•
Do not use solvents or volatile chemicals to clean the lamp, as it may
damage the plastic parts of the product.
PRECAUTIONS
•
Before charging, and when the product is not in use, turn the work
lamp off.
•
Be careful not to damage the transparent light cover, and protect the
product from falling to the ground.
•
Use only the charger supplied.
•
Warranty does not cover mechanical damages. Decrease in battery’s
operating time does not fall under warranty’s regulation.
•
Never cover the transparent light cover when the lamp is on. Never
point light directly at eyes. Let the torch cool down completely
before cleaning.
•
Charge the unit before the first use.
•
The efficiency may decrease if the work lamp is used or charged
when temperature is below 0˚C or above 40˚C.
•
Make sure to handle and use this lamp according to above
instructions.
•
Keep the product away from water and other liquids.
•
Any repair can be conducted only by qualified service.
Warning: To protect the battery life, please recharge the lantern
whenever the light goes dim.