Rebel AL6061 User Manual Download Page 2

·

1

·

About

 This 

Manual

This manual contains details of the product, and information on its operation and maintenance and other helpful tips for owners. Read it carefully and 
familiarize yourself with the  Rebel  before using it to ensure safe use and prevent tragic accidents. Be sure to retain this manual as your convenient 
information source.

This manual contains many Warnings and Cautions concerning the safe operation and consequences if safe setup, operation 
and maintenance are not performed. All information in this manual should be carefully reviewed and if you have any 
questions you should contact us immediately. The notes, warnings and cautions contained within the manual and marked by 
this triangular Caution Symbol should also be given special care. Users should also pay special attention to information 
marked in this manual beginning with NOTICE.

Because it is impossible to anticipate every situation or condition which can occur while riding, this manual makes no representations about
the safe use of bicycles under all conditions. There are risks associated with the use of any bicycle which cannot be predicted or avoided, and which are 
the sole responsibility of the rider. You should keep this manual, along with any other documents that were included with your bicycle, for future 
reference, however all content in this manual is subject to change or withdrawal without notice. Visit www.alteregobikes.com to download the latest 
version. Alter Ego Electric Bikes makes every effort to ensure accuracy of its documentation and assumes no responsibility of liability if any errors or 
inaccuracies appear within. Assembly and first adjustment of your Rebel requires special tools and skills and it is recommended that this should be 
done by a trained bicycle mechanic if possible.

!

Summary of Contents for AL6061





























Reviews: