Rebel AL6061 User Manual Download Page 17

·

16

·

NOTICE:

It is recommended that users pay close attention and ride within the following limitations to ensure the hub motor does not

overheat or become damaged from excessive loading.

Parking Storage and Transport

Please follow these basic parking, storage and transport tips to ensure your bike is well cared for on and off the road.

When pushing the vehicle manually, turn off the power to avoid accidental acceleration from the motor.

It is recommended to park indoors.

Switch the power off, and any lights to conserve battery. Remove the key from the bike and ensure the battery is locked to the frameor 

removed and brought with you for security.

In public places, your Rebel  must be parked in accordance with local rules and regulations.

If you must park outdoors in rain, or wet conditions you should only leave your Rebel outside for a few hours and proceed to park the 

bike in a dry location afterwards to allow all the systems to dry out. Much like a regular bike, use in wet conditions mandates a more 
regular maintenance schedule to ensure your bike does not become rusty, corroded and to ensure all systems are always working safely.

Do not park, store, or transport your Rebel on a rack that is not designed for the size and weight of the bike.

Wide tires, as used on Rebel, cannot fit into all bike racks, please select an appropriate rack for the width of tires used on your bike.

Locking up your bike is recommended to ensure your bike is secure and the chance of theft is reduced. Alter Ego Electric Bikes makes 

no claims or recommendations on the proper lock hardware or procedures to secure your bike, but we do recommend you take the 
appropriate precautions to keep your Rebel safe from theft.

When storing your bike or carrying your bike on a rack for transport, you can remove the battery pack to reduce the weight of the bike 

and make lifting and loading easier.

Summary of Contents for AL6061





























Reviews: