Rebel TOOLS RB-1002, User Manual

Page: 36 / 147

36 EN
INFORMATION ABOUT THE POWER TOOL
Intended use
This screwdriver is intended for driving in and loosening screws as well as drilling.
Technial data
Battery 20 V; 2 Ah, Li-Ion (RB-2001)
Charging time 1- 1,5 h
AC charger (RB-2001-CH)
Input 100 – 240 V; 50/60 Hz
Output 21,5 V; 2,2 A
Max. torque 30 Nm
Number of torque positions 21
No load speed
Level I 350 rpm
Level II 1300 rpm
Chuck up to 13 mm
Weight 1,5 kg
In set 13 accessories, AC charger, battery, user's manual
Sound pressure level L
PA
80,9 dB(A), K= 3 dB(A)
Sound power level L
WA
91,9 dB(A), K= 3 dB(A)
Hand-arm vibration a
h
(screw driving without impact)
12,473 m/s
2
K=1,5 m/s
2
Vibration level
The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 61029; it may be used to compare one
power tool with another and as a preliminary assessment of exposure to vibration when
using the power tool for the applications mentioned.
• Using the power tool for different applications, or with different or poorly maintained
accessories, may significantly increase the exposure level.
• The times when the tool is switched off or when it is running but not actually doing the
job, may significantly reduce the exposure level. Identify additional safety measures
to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
OPERATION
Note: The battery is partially charged. To ensure proper operation of the power tool,
the battery must be fully charged before first use.