2
EN
BATTERIES, ELECTRICITY & HEAT
• Make sure the battery compartment is closed securely.
• Keep batteries out of the reach of children.
• Only use AAA alkaline batteries.
• Correctly insert the batteries into the battery compartment, respecting
the polarity.
• To prevent battery leakage, remove the batteries from the device if it is not
used for a long period of time.
• Leaks from battery cells can occur under extreme conditions. Wear
protective gloves when handling leaking batteries and dispose of the
gloves after use. If the battery leaks, do not allow any battery fluid to
come into contact with the skin or eyes. If contact has been made, wash
the affected area with copious amounts of water and seek medical advice.
• Rechargeable AAA batteries can be used in this device. Rechargeable
batteries must be removed from the device before being charged.
• Only charge rechargeable batteries with the charger that comes with
these batteries and follow the instructions in the manufacturer’s manual.
• Rechargeable batteries should only be recharged under adult
supervision.
• Non-rechargeable AAA batteries should not be recharged.
• Avoid mixing the batteries, i.e. new, used or different types.
• Do not short circuit the contacts inside the battery compartment or any
batteries.
WARNING!
Never damage rechargeable batteries. Damaging the
casing of the device and/or piercing rechargeable batteries might
lead to explosion or fire!
• Do not crush, puncture or dismantle the device; this might damage the
battery.
WARNING!
Do not throw the device/batteries into a fire, as they may
explode!
• Do not use, expose or store the device in the immediate vicinity of heat
sources such as naked flames.
• Do not dispose of the device in your household waste, as it contains
batteries. Batteries can be disposed of by taking them to your local
recycling station. Contact your local government offices for details.
3) INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device. Make sure
the device is complete and undamaged. If any components are missing
or damaged, contact the vendor and do not use the product. Retain the
packaging or recycle it in accordance with local regulations
PARTS & FEATURES OF THE DEVICE
A. Smart scale (device)
B. LCD screen
C. Electrodes
D. Battery cover
E. Unit selector
B
D
E
C
A
C
C
C
FRONT
BACK
FIRST USE
• Remove the device and accessories from the box. Remove any stickers,
protective film or plastic from the device.
• Before using the device for the first time, clean the base with a damp
cloth.
• Thoroughly dry the device.
• Never use aggressive or abrasive cleaning materials, a scouring sponge
or steel wool; these could damage the device.
INSTALLING THE BATTERY
• Remove the battery cover
(D)
from the device by pushing it down.
• Insert the (2x) AAA batteries into the battery compartment, respecting
the polarity.
• Close the battery cover
(D)
by positioning it back on the device and gently
pushing it in place. You will hear a ‘click’, indicating that the battery cover
is well secured.
CHANGING THE WEIGHT UNIT
The weight unit on the device can be set to kilograms (kg), pounds (lb) and
stone (st lb). Select the desired weight unit (kg, lb, st lb) by pressing the unit
selector
(E)
. The selected weight unit will be visible on the LCD screen
(B)
.
POWERING THE DEVICE
To power on the device, lightly step on the device
(A)
with one foot until the
LCD screen
(B)
lights up. Take off your foot and wait for 10 seconds, until the
LCD screen reads 0.0 kg. The device is now ready for use.
The device automatically powers off after ± 20 seconds of not being in use.
USING THE DEVICE
WARNING!
The device’s glass plate may be slippery when wet.
Make sure the glass plate and feet are dry before use.
•
Note!
To ensure accurate operation, it is advised to take measurements at
the same time of day under the same circumstances.
• Place the device
(A)
on a flat and stable surface, in a place where it
cannot fall over or slip.
• Power on the device by lightly stepping on the device until the LCD
screen
(B)
lights up. Wait for 10 seconds, until the LCD screen reads 0.0 kg.
• Step on the device with bare feet and ensure you are standing still
with your weight equally divided and both feet distributed on the
electrodes
(C)
.
• Keep your body still and erect until the device stabilises your weight.
• The numbers on the LCD screen
(B)
will flash three times, indicating
correct measuring.
CONTROLLING YOUR DEVICE BY MEANS OF THE SMART APP
To control your device by means of your smartphone or tablet, download the
“Fitdays” app which is available for Android and IOS. You can download the
app from the app store of your device (Play Store or Apple Store). You can
also scan the QR code below, which will guide you to the Fitdays app of your
app store.
INSTALLING THE FITDAYS APP
• Download and install the “Fitdays” app on your smartphone or tablet.
• Open the “Fitdays” app.
• It is required to create a user account, so you can store your personal
user settings.
CONNECTING THE DEVICE WITH THE FITDAYS APP
• Make sure the BT function is enabled in your smartphone or tablet and
that it is connected with the internet.
• Keep the device and your BT enabled appliance within 1 metre (3 ft) of
each other.
